Call 08048984677 77% Response Rate

our range

Sika Products

Our product range includes a wide range of sika plastiment bv40 concrete admixture, sika separol waterproofing chemical, sika rep microconcrete waterproofing chemical, sika plast 3001 concrete admixture, sika rantite concrete admixture and sika 101h crystalline waterproofing coating.
Sika Plastiment BV40 Concrete Admixture

Sika Plastiment BV40 Concrete Admixture

Rs 140  / LitreGet Best Price
Packaging SizePlastic Can
Relative Density~1.16 at 30 degree celsius
AppearanceDark brown liquid
Storage Conditions12 months from date of production
Chemical BaseModified Ligno Sulphonate

Sika Plastiment BV40 is a versatile and economical concrete plasticizer & waterproofing compound. It Compiles with IS: 9103 - 99, ASTM C 494/C 494 M-99a Type A.

Features:

Improved workability without increased water

Reduced water without loss of workability

Increased strength/durability

Cement saving/economy

Improved surface finish

Unaffected setting times

Reduced shrinkage and creep

Chloride free - does not attack reinforcement

Up to 12%, water reduction is possible


Uses:

Exposed surfaces are important

Maximum performance is desired

Placing conditions are difficult

Poor quality aggregates are found

Pre-cast elements are produced

Piling

 
Dosage:

0.2 to 0.8% by weight of cement. For more demanding situations use 0.5%. Plastiment -BV/40 is compatible with all types of Portland cement including Sulphate Resistant Cement (SRC). Actual dosage to be finalized on the basis of site trials.

 
Dispensing:

It should be dispensed directly into the mixing water prior to itsaddition to the wet concrete. When accidental overdosing occurs, Plastiment -BV/40 does not entrain excessive amount of air and does not effect the ultimate strength, only the setting time is extended. 

 
Cleaning of Tools:

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.

 

View Complete details

get quote request a call back
Sika Separol Waterproofing Chemical

Sika Separol Waterproofing Chemical

Rs 145  / LitreGet Best Price
Density0.83+- 0.02 kg/l (at +20 degree Celsius)
Shelf Life12 months from date of production if stored properly in undamaged unopened,original sealed packaging
AppearanceLiquid / Reddish
Storage conditionsStore in dry conditions at temperatures +30 degree Celsius Maximum
Consumption on timber or plywood formwork1 litre for ~20-25 m2
Consumption on metal or plastic formwork1 litre for ~40 m2
Features:
  • Easy to apply
  • Combined chemical and physical action
  • Ensures fair-faced concrete finish
  • No staining
  • Suitable also for use on formwork used in the steam curing process

 

Uses:

  • Form release agent for steel and wooden formwork

 

Applications:

  • All surfaces to be coated must be clean and free from grease and old concrete.
  • Apply one uniform, thin coat of it by brush, roller or spray equipment, on dry or damp formwork.
  • To achieve the optimum result it is recommended to
    pour the concrete minimum 4 hours after application.

 

Limitations:

  • Protect fresh coat from the rain.
  • Cleaning the mold surface between each use and before the application is essential to prevent the formation of hardened concrete "build up".
  • It contains flammable materials and falls under the dangerous goods regulations (class 3).
  • During application in confined areas, ditches, shafts etc. adequate ventilation must be provided.
  • During its application, open fire and other igniting agents (e.g. welding works) must be removed
  • In a liquid not fully cured state the thinner and the product contaminate water and should not get into drains, water, and ground.

View Complete details

get quote request a call back
Sika REP Microconcrete Waterproofing Chemical

Sika REP Microconcrete Waterproofing Chemical

Rs 12  / KgGet Best Price

Minimum Order Quantity: 360 Kg

Product Brochure

Usage/ApplicationWaterproofing
BrandSika
Packaging Size10kg
Coverage14 sq mt
FormPowder
Grade StandardAnalytical Grade
SHELF LIFE6 Month

Product Description SikaRep Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement. Uses SikaRep Microcrete-4 is mainly recommended for the repair of damaged concrete structures e.g. Columns Beams Slabs, etc. It is also recommended for grouting of large gaps. Characteristics / Advantages A properly designed concrete which can be pumped of poured into restricted Placement without any vibration. Expansion system compensates for shrinkage settlement in plastic stage. Easy to mix and apply, high flow characteristic, rapid strength development, good bond with old concrete Contains no added chloride



Additional Information:

  • Production Capacity: avilable
  • Delivery Time: 1-7 days
  • Packaging Details: 30kg bag

View Complete details

get quote request a call back
Sika Plast 3001 Concrete Admixture

Sika Plast 3001 Concrete Admixture

Rs 60  / KilogramGet Best Price

Minimum Order Quantity: 10 Kilogram

Product Brochure

BrandSIKA
FormLIQUID
ApplicationImproved durability
UsageHigh performance concrete
Type Of AdmixtureWater Reducing High Efficient Superplasticizer
Packaging Size230 kg HDPE
Packaging TypeTanker
Shelf Life12 months
ColorLight Brown hazy liquid
pH Value6
SikaPlast® 3001 NS A highly effective high range water reducing agent andsuperplasticizer for free flowing concrete.

Additional Information:

  • Item Code: 3001
  • Production Capacity: avilable
  • Delivery Time: 1-5 days
  • Packaging Details: 230 kg HDPE carboy or Tanker supply.

View Complete details

get quote request a call back
Sika Rantite Concrete Admixture

Sika Rantite Concrete Admixture

Rs 110  / KilogramGet Best Price

Minimum Order Quantity: 10 Kilogram

Product Brochure

BrandSika Chemicals
Usage/ApplicationFinishing
Packaging Size200kg
CategoryAcrylic Based Polymer Coating
TypeLiquid
Grade StandardAnalytical Grade
Sika®RainTite waterproofing system consists of a combination of :Sika®RainTite Waterproofing CompoundHighly flexible UV resistant acrylic emulsionSika®RainTite MembraneNon-woven polyester membraneThe system forms a fully bonded, durable, flexible waterproofingmembrane

View Complete details

get quote request a call back
Sika 101H Crystalline Waterproofing Coating

Sika 101H Crystalline Waterproofing Coating

Rs 3,000  / LITREGet Best Price

Product Brochure

Packaging Size30kg
Packaging Typebag
Brandsika
Colorgrey
Formpowder
Surface Of Applicationwater tank, stp tank basement
Product Description Sika-101h is a ready to use cement based powder capillary waterproofing system for concrete and mortar to prevent water infiltration or seepage of water in the area of low pressure of concrete structure or any cementitious substrate. Uses Sika-101h forms slurry consistency when mixed with water. When it is applied to the concrete substrate it forms insoluble crystals inside water bearing capillaries and seal against further seepage of water. Sika-101h blocks the pores in concrete structures such as Basement Reservoirs Sewage water and effluent treatment plant Tunnel and underground subways Foundations Swimming pools Underground parking structures Water tanks

View Complete details

get quote request a call back
Sika Rep Microcrete 4

Sika Rep Microcrete 4

Rs 390  / PIECEGet Best Price

Product Brochure

Grade StandardASTM C1107
Usage/ApplicationBeams
Location/CityJaipur
Packaging TypeBag
Packaging Size30kg
ColorGray

SikaRep® Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement. 

View Complete details

get quote request a call back
Sika 214 Grouting Compound

Sika 214 Grouting Compound

Rs 390  / PackGet Best Price

Product Brochure

Usage/ApplicationConstruction
Brandsika
Gradegood quality
Packaging Size30kg
Packaging Typebag
ColorGray
Featureshigh precision
Yield2100-2300
Ambient Temperature40
Pot Life Of Mix20 min at 30 degree
Product Description Cement based flowable, two stage expanding grout with selected aggregate. Uses To grout bearings, machine foundations, columns joints in precast construction etc. To grout anchors in concrete To grout cavities, gaps and voids in concrete Characteristics / Advantages Easy to use (ready to mix powder) Easy to mix, only add water Adjustable consistency Very good flow characteristics Rapid strength development Excellent bond to Concrete No Segregation or bleeding High final strengths Initial expansion by gas generation Impact- and vibration resistant Non-corrosive Not flammable, non-toxic Shrinkage compensated

View Complete details

get quote request a call back
Sika Plast 4202 NS Waterproofing Chemical

Sika Plast 4202 NS Waterproofing Chemical

Rs 65  / KilogramGet Best Price

Minimum Order Quantity: 500 Kilogram

Product Brochure

FormLiquid
Usageexcellent workability
Form Typetanker
Model Number4202
Type Of Admixturesuperplasticizer
Typehigh water reduction
ApplicationHigh efficient superplasticizer
Brandsika
SikaPlast® 4202 NS is the latest development of superplasticizer for concrete. Itmeets the requirements for high range water reducing superplasticizers.

Additional Information:

  • Item Code: 4202
  • Production Capacity: ON ORDER
  • Delivery Time: 1-7 DAYS
  • Packaging Details: 230kg

View Complete details

get quote request a call back
Sika DUR 42 Waterproofing Coating

Sika DUR 42 Waterproofing Coating

Rs 3,200  / PackGet Best Price

Product Brochure

BrandSika Chemicals
Usage/Applicationeasy and clean
Packaging Size12kg
Category3component epoxy grout
Typesolvent free component
Grade StandardAnalytical Grade
Materialavilable
Featuresrapid hardening
Product Description Sikadur -42 is a solvent-free, 3-component, pourable grout, based on a combination of high strength epoxy resins and specially graded aggregates. After mixing, it provides a free flowing self-levelling epoxy grout. Uses Sikadur -42 can be applied on concrete, stone, mortar, steel, aluminium, asbestos cement, wood, polyester and epoxy as a self-levelling, flowable epoxy mortar. Structural boding of; n Starter bars n Anchors n Braces and tie bars Grouting of; n Crash barrier posts n Bearing plates n Machine bases n Mechanical bridge joints n Bridge bearings Tie-less rail grouting; n Crane rails n In tunnels n On bridges

View Complete details

get quote request a call back
Sika Plastiment 5202 Concrete Admixture

Sika Plastiment 5202 Concrete Admixture

Rs 55  / KilogramGet Best Price

Minimum Order Quantity: 30 Kilogram

ApplicationPermeability
Brandsika
Usagehigh water reduction
Formliquid
Type Of AdmixtureRetarding Superplasticizing Admixture
Packaging Size230 kg
Packaging TypeHDPE carboy
ColorDark Brown liquid
SikaPlast® 5202 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers Uses SikaPlast® 5202 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast® 5202 NS is used for the following: A wide range of applications where excellent workability is requested Concrete with high water reduction High efficient concrete applications Variable use in different concrete systems with different raw materials

Additional Information:

  • Item Code: 5202
  • Production Capacity: avilable
  • Delivery Time: 1-5 days
  • Packaging Details: 230kg

View Complete details

get quote request a call back
Sika Plastiment 2002 Concrete Admixture

Sika Plastiment 2002 Concrete Admixture

Rs 35  / KilogramGet Best Price

Minimum Order Quantity: 200 Kilogram

ApplicationHigh efficient concrete
Brandsika
Formliquid
Packaging Size230kg
Packaging TypeTanker
Colorlight brown
Shelf Life12 month
Product Description SikaPlast 2002 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers

Additional Information:

  • Item Code: 2002
  • Production Capacity: FOR ORDER
  • Delivery Time: 1-7 DAYS
  • Packaging Details: 230kg

View Complete details

get quote request a call back
SIKA App Membrane Concrete Admixture

SIKA App Membrane Concrete Admixture

Rs 2,200  / LitreGet Best Price
Usage/ApplicationRoof
Thickness3MM
BrandSIKA
ColorBLACK
Packaging TypeROLL
Physical StateTENSILE STRENGTH 5CM
Size10MTR.
This type of membrane is manufactured by modifying premium grade asphalts withatactic poly propylene and specially reinforced with non- woven polyester. This typeof membrane show excellent strength, elasticity and durability.
Uses It is used as waterproofing /dam proofing membrane for protection of varioussubstrates in wide range of applications Medium to large roof slabs ( domestic, commercial and industrial  Basements and raft slabs Underground car parks etc Bridges & Underpass

View Complete details

get quote request a call back
Sika Plastiment NS 2001 Concrete Admixture

Sika Plastiment NS 2001 Concrete Admixture

Rs 33  / KilogramGet Best Price

Minimum Order Quantity: 200 Kilogram

ApplicationCompatibility
Brandsika
Usagehigh quality concrete
Formliquid
Form Typedark brown liquid
Model Number2001 ns
Type Of Admixturewater reducing admixture
Packaging Size250kg
Packaging Typebarrel
Colordark brown
Relative Density~1.12 kg/l
Shelf Life12 month
A liquid mid-range water-reducing cum water proofing concrete admixture with apowerful plasticizing effect. Also a substantial water reduction can be achieved topromote high ultimate strengths at the high dosage range.

Additional Information:

  • Production Capacity: FOR ORDER
  • Delivery Time: 1-7 DAYS
  • Packaging Details: 250kg

View Complete details

get quote request a call back
Sikatop Seal 109 Waterproofing Chemical

Sikatop Seal 109 Waterproofing Chemical

Rs 110  / KgGet Best Price

Minimum Order Quantity: 50 Kg

Density1.6 kg/l ( mixed density ) at 27 degree C
Packaging50 Kg, 20KG
Ambient Temperature 10 degree C min. / +40 degree C max.
Bond StrengthN/mm2 after 28 days (with SikaFab 1)
Temperature10 degree C min. / +40 degree C max.
Thickness1mm with SikaFab 1
Substrate Temperature10 degree C min. / +40 degree C max.
Product Description
  • SikaTop Seal 109 hi is an elastic liquid applied, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system

Uses
  • Used as a seamless, impervious coating on flat roof for both exposed and concealed waterproof coating system
  • Basements, water retaining structures, underground concrete structures, pits basins, sumps etc.

Characteristics / Advantages
  • Crack-bridging
  • Elastic
  • Good Impermeability against water ingress
  • Highly water resistant, arrest salt petre and prevent carbonation
  • Extremely good bonding with high abrasion resistance
  • Simple application and fast curing
  • It has excellent adhesion to concrete, brickwork, corrugated asbestos and asbestos cement.

??

Packaging Type

  • 25 kg System
  • Part A 10.0 kg container
  • Part B 15.0 kg bag
  • 50 kg System
  • Part A 20.0 kg container
  • Part B 30.0 kg bag

View Complete details

get quote request a call back
Sika Dur 31C Waterproofing Chemical

Sika Dur 31C Waterproofing Chemical

Rs 350  / KilogramGet Best Price

Minimum Order Quantity: 1000 Kilogram

Usage/ApplicationWaterproofing
Packaging Size10kg
Coverage14 sq mt
Grade StandardAnalytical Grade
Purity98%
Shelf Life48 Months
BrandSika
Country of OriginMade in India
Sikadur®-31 C is solvent-free, thixotropic two part epoxy based adhesive forbonding Sikadur®-Combiflex® tape or Sikadur®-Hypalon strip to differentsubstrates.

View Complete details

get quote request a call back
Sika Grout 214 Grouting Compound

Sika Grout 214 Grouting Compound

Rs 14  / KilogramGet Best Price

Minimum Order Quantity: 1000 Kilogram

BrandSika
Packaging size30 Kg
Grading2.36 mm down
Ambient Temperature+5 Celsius minimum and +40 degree Celsius maximum
Mixing Time3 minutes minimum
Substrate Temperature+5 degree Celsius minimum and +40 degree Celsius maximum
Pot life~ 20 minutes at +30 degree Celsius
E Modulus~ 37000 N/mm
StandardsASTM C 1107
Consumption~2200 kg/m3
Storage Conditions6 months from date of production
Bulk Density~1.5 kg/l (of fresh grout) at 27 degree Celsius
Layer Thickness20 mm minimum and 100 mm maximum
AppearanceGrey powder
Chemical BaseCement, selected fillers and aggregates, special additives

Features:

Easy to use (ready to mix powder)

Easy to mix, only add water

Adjustable consistency

Very good flow characteristic

Rapid strength development

Excellent bond to Concrete

No Segregation or bleeding

High final strength

Initial expansion by gas generation

Impact- and vibration resistant

Non-corrosive

Not flammable, non-toxic

Shrinkage compensated

 
Uses:

To grout bearings, machine foundations, columns joints in precast construction

etc.

To grout anchors in concrete

To grout cavities, gaps, and voids in concrete

 
Substrate Quality:

Concrete, grout, stone: Surfaces must be sound, clean, free of ice, oils, grease, standing water and any loose or friable particles and any other surface contaminants.

The concrete “pull off” (tensile) strength should be > 1.0 MPa.

Steel, iron: Clean, free of oil or grease, rust and scale etc.


Substrate Preparation:

The substrate should be prepared by suitable mechanical preparation techniques such as high-pressure water jetting, breakers, blast cleaning, scrabbles, etc.

The concrete substrates should be pre-soaked with clean water continuously for 2 - 6 hours to ensure a saturated surface dry condition throughout the operation.

Immediately before pouring remove all excess or standing water from within any formwork.

 
Application Method:

Pour grout immediately after mixing into the prepared openings. Ensure that air displaced by the grout can easily escape; otherwise entrapped air will prevent full contact grouting. Wet porous substrates to the saturated surface dry condition.

When grouting base plates etc., ensure that a continuous and sufficient head of pressure is maintained to keep the grout flowing.

To make optimum use of the products expansion properties, apply the grout as quickly as possible (within max.15 minutes).

 
Mixing Tools:

Mix grout powder mechanically in the correct ratio with water with low speed (max. 500 rpm) electric drill to avoid entraining too much air.

Put around 80 to 90% of required water in the mixing drum, followed by Sika Grout 214 and then add the balance water.

Dependent on the desired consistency and flow properties, the mixing ratio can be adjusted.

Do not mix more grout, which cannot be used within Pot Life.

Don't add extra water

 
Mixing:

Water:Powder (For Flowable)= 0.15:0.16 by weight (4.5:4.8 litre water per 30 kg bag).

 
Curing Treatment:

Keep any visible, exposed grout surfaces as small as possible and protect from
premature drying out by suitable measures (keep moist, cover with wet Hessian
etc.).

View Complete details

get quote request a call back
Sika Injection101H Waterproofing Chemical

Sika Injection101H Waterproofing Chemical

Rs 950  / KilogramGet Best Price

Minimum Order Quantity: 500 Kilogram

Featureslow viscous, fast foaming and solvent-free water-reactive polyurethane injection foam resin
Usage/Applicationhigh water intrusions in cracks, joints and cavities in concrete, brickwork and natural stonework
CategoryWaterproofing Coating
Shelf Life6 months
Packaging20kg
Physical StatePowder
Sika Injection-101h is a low viscous, fast foaming and solvent-free water-reactive polyurethane injection foam resin, which cures to a dense flexible foam with a fine cellular structure.

Additional Information:

  • Item Code: 101H
  • Production Capacity: avilable
  • Delivery Time: 1-5 days
  • Packaging Details: 20KG

View Complete details

get quote request a call back
Sika Viscocrete Admixture

Sika Viscocrete Admixture

Rs 112  / LitreGet Best Price
Usage/ApplicationConstruction
Packaging Size10 L
BrandSika
Packaging TypeBucket
ColorBrown
Physical StateLiquid
Sika Viscocrete Admixture imparts very high workability, improved workability retention and allows a large reduction in water content.

Features
  • Improved dispersion properties
  • Very high water reduction
  • Improved strength and density
  • Improved durability
  • Improved cohesion properties
  • Improved rheology
  • Improved flowability
  • Reduced drying shrinkage
  • Improved workability retention
 
Uses
  • High-performance concrete
  • High strength concrete
  • Ready-mixed concrete
  • Self-compacting concrete
  • Precast concrete
  • Prestressed concrete
  • Pumped concrete

View Complete details

get quote request a call back
Sika Plastocrete DM Concrete Waterproofing Admixture

Sika Plastocrete DM Concrete Waterproofing Admixture

Rs 120  / LitreGet Best Price
BrandSika
Usage/ApplicationConstruction
Packaging TypePlastic can
Packaging Size4.5 Kg
Density1.07 kg/litre approx.
Sika Plastocrete DM Concrete Waterproofing Admixture is a liquid additive based on action lignosulfonates waterproofing and plasticizer. It is non-toxic, non-flammable and does not contain chlorides.

Applications:
  • Highly waterproof concrete to be used in roofs, cisterns, swimming pools, basements. Quality concrete for buried structures in contact permanent with water.
  • Concrete with excellent finish and uniform quality.

 

Advantages:

  • Increases the durability of concrete in contact with water.
  • Produces resistances greater than the same age as normal concrete, that allows faster stripping.
  • The setting time does not vary.
  • Economy due to the high manageability of the mix and increase of resistances.
  • It incorporates up to 4% of air with the normal dosage.

 

How to use:

  • The recommended amount is added to the mixing water of the concrete.

 

Dosages:

  • It has a normal dosage of 0.5% of the weight of the cement of the mixture, that is, per bag of cement of 50 kg. They require 250 g or 234 cm3.

 

Limitations:

  • The use of Plastocrete DM requires the application of known standards for the manufacture of concrete. To make a waterproof concrete is important
  • Work with a correct granulometry, observe especially the sufficient content of fines.
  • Use enough cement.
  • Carry out a complete mixing, consolidation, and curing of the concrete.
  • Avoid cracks.
  • Treat cold joints with suitable materials or methods

View Complete details

get quote request a call back
Sika Rapid DPM Waterproofing Chemical

Sika Rapid DPM Waterproofing Chemical

Rs 120  / LitreGet Best Price
Density1.16g/cm3
Sag FlowSpreads easily when applied using brush, squeegee or short/medium pile roller
Flash PointClosed cup less than 130 degree Celsius,open cup less than 150 degree celsius
Storage ConditionsApproximately 12 months from date of production
Chemical Base1 part reaction cure synthetic Resin
Laying Time~ 10 - 20 minutes
Curing RateApproximately 45 minutes at 20 degree Celsius & 50% Rh
Service TemperatureUp to + 35 degree Celsius
Sika Rapid DPM is a single part moisture curing reaction to polyurethane.

Features:

  • Rapid drying (approx 45 minutes at 50% Rh & 20 degree Celsius).
  • Especially suited to refurbishment projects where old adhesive residues are present.
  • Suitable for underfloor heating.
  • Applied by roller or squeegee.

Uses:
  • For Priming, Consolidating and Sealing of Absorbent and Non-absorbent sub-floors, consolidating weak cement screed
  • and isolation of old adhesive residues.
  • Can be used as a Damp Proof Membrane on sub-floors not under hydrostatic pressure.
  • Can be used for underfloor heating. (Max 3% moisture CM Method, 4.5% Tramex).

 

Consumption:

  • As a surface conditioner/primer: Apply 1 coat at a minimum consumption of 100-200 grams/m (85-170 ml/m )
  • As an isolator for old adhesive residues: Apply 1 coat at a minimum consumption of 100-200 grams/m (85-170 ml/m)
  • As a Damp Proof Membrane: Apply 2-3 coats at 100-250 grams/m 2 (85-215 ml/m2).
  • Allow each coat to fully cure.
  • Total consumption should be no less than 400 grams/m2 (340 ml/m2).

 

Substrate Quality:

  • Clean, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance, and other poorly adhering particles must be removed. Maximum moisture content must not exceed 4% CM method (6% Tramex) 3% CM (4.5%Tramex) in the case of underfloor heating.
  • Standard construction rules must be observed.

 

Substrate Preparation:

  • Concrete/cement screed: Must be clean, contaminant-free and thoroughly cleaned with the industrial vacuum cleaner.
  • Anhydrite screed / Anhydrite flowable screed: Must be ground and thoroughly cleaned with the industrial vacuum.
  • Unknown substrates: Tests are recommended for compatibility and adhesion.

 

Substrate Temperature:
  • During laying and until it has fully cured substrate temperature must be at least + 10°C and in the case of underfloor heating < + 20°C.
  • For Substrate temperatures the standard construction rules are relevant

 

Ambient Temperature:

  • Room temperature above +10°C. Relative air humidity < 75%.
  • For ambient temperatures the standard construction rules are relevant

 

Substrate Moisture Content:

  • Maximum substrate moisture content: 4% CM for cement screed (ca. 6% Tramex / Gravimetric weight percent), 0.5% CM for anhydrite screed, 3 - 12% CM for magnesia flooring (proportion of organic parts).
  • Maximum substrate moisture content in case of underfloor heating: 3% CM for cement screed (ca. 4.5% Tramex / Gravimetric weight percent), 0.3% CM for anhydrite screed, 3 - 12% CM for magnesia flooring (proportion of organic parts).

 

Application Instructions:

  • When applying more than one coat of sika rapid DPM, the 2nd coat should be applied 90 degree to the 1st. Ensure that a continuous uniform coat is achieved using a medium pile roller, brush or rubber squeegee. When used as a damp proof membrane the finished surface must provide a continuous defect-free layer with a ‘shiny’ appearance. When using multiple coats, allow each coat to fully dry between applications.

View Complete details

get quote request a call back
Sika Dur 52 Waterproofing Chemical

Sika Dur 52 Waterproofing Chemical

Rs 152  / KilogramGet Best Price

Minimum Order Quantity: 500 Kilogram

Usage/ApplicationWaterproofing
Packaging Size10kg
Features2 component solvent
BrandSika
CategoryAcrylic Based Polymer Coating
Shelf Life3 Year
Product Description Sikadur® -52 is two part, solvent-free, low viscosity injection-liquid, based on high strength epoxy resin. Uses As an injection resin with good adhesion to dry concrete, mortar, stone, steel and wood.Sikadur® -52 is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.

View Complete details

get quote request a call back
Sika Dur 52 Waterproofing Chemical

Sika Dur 52 Waterproofing Chemical

Rs 810  / KgGet Best Price
Usage/ApplicationLow viscosity
Typelow viscosity epoxy resin
FeaturesInjectable with single component pumps
Packaging TypePacket
Grade StandardReagent Grade
Applicationhigh strength epoxy resin
BrandSika Chemicals
Form of ChemicalLiquid
Shelf Life12 months
Packaging SizeOther
Sikadur®-52 is two part, solvent-free, low viscosity injection-liquid, based on highstrength epoxy resin.

View Complete details

get quote request a call back
Sika Topseal 107 Waterproofing Chemical

Sika Topseal 107 Waterproofing Chemical

Rs 85  / KilogramGet Best Price

Minimum Order Quantity: 50 Kilogram

Usage/Application2 Pack Acrylic cementitious
CategoryCementitious Waterproofing
Mixed Density2.0 kg/ ltr
Pot life35 minutes
Shelf Life12 months
Storage Conditiondry and cool
Working Time2- 6 hours
SikaTop® Seal-107 is a two part acrylic polymer modified cementitious liquid applied waterproof coating system. SikaTop® Seal-107 is used for external and/or internal waterproofing in the following structures:  Water-tanks,  Basement,  Terraces, and balconies,  Bridges,  Retaining walls,  Sea walls,  Flat roofs

View Complete details

get quote request a call back
Sika Block Paving Seal Waterproofing Chemical

Sika Block Paving Seal Waterproofing Chemical

Rs 85  / KilogramGet Best Price
Packaging Size25 litre
Form of ChemicalLiquid
Lower explosion limit0.8%(volume)
Upper explosion limit7%(Volume)
Vapour pressure4,9996 hPa
Density0.83 g/cm3 at 20 degree Celsius
ViscosityGreater than 7mm2/s at 40 degree celsius
Flash point41 degree Celsius
Sika Block Paving Seal is a clear resin that impregnates and seals block paving. It resists oil and diesel spillage and improves the overall appearance of the paving blocks.

View Complete details

get quote request a call back
Sika Dur 32 LP Bonding Agent

Sika Dur 32 LP Bonding Agent

Rs 630  / KilogramGet Best Price

Minimum Order Quantity: 100 Kilogram

TypeEpoxy Based
FormLIQUID
BrandNitobond
Packaging Size5 kg (A + B) 25 kg (A + B)
Shelf Life24month
Surface Of ApplicationHigh bond strength
ColorComponent A White Component B Dark grey Components A + B Concrete grey
FeaturesGood chemical resistance
Packaging TypeBag
Grade StandardIndustrial Grade
Sikadur®-32 LP is a moisture tolerant, structural, twopart bonding agent, based on a combination of epoxyresins and special fillers, designed with a longer potlifeor working time for use at higher temperatures,between +20 °C and +40 °C.

View Complete details

get quote request a call back
Sika Samcrete Waterproofing Chemical

Sika Samcrete Waterproofing Chemical

Rs 145  / KilogramGet Best Price
Usage/ApplicationWaterproofing
Packaging Size20kg
Grade StandardReagent Grade
Purity98%
Acrylic based waterproof coating system for concrete andmasonry

View Complete details

get quote request a call back
Master Flex PU Sealant

Master Flex PU Sealant

Rs 430  / PieceGet Best Price

Product Brochure

Packaging TypeBag
BrandBASF
Usage/ApplicationWood, Glass
FormLiquid
Packaging Size600ml
Shelf Life12 months
Model Number472
Grade StandardIndustrial Grade
MaterialXylene
Master Seal NP 472 is a high performance one component, moisture curing, polyurethane construction sealant. In properly designed and constructed joints the product has been formulated to offer a non - slump elastomeric seal, which exhibits good skin formation time and a fast cure. TYPICAL USES Master Seal NP 472 has been developed specifically for sealing dynamically moving joints such as, expansion and control joints. MasterSeal NP 472 demonstrates high elasticity and recovery properties and therefore may be used to bond and seal most common building materials including concrete, glass, wood, stone, metal and anodised aluminium. In addition MasterSeal NP 472 has excellent tear resistance and good weathering characteristics.

View Complete details

get quote request a call back
Sika 202 PU Injection Grouting

Sika 202 PU Injection Grouting

Rs 1,450  / sq ftGet Best Price

Minimum Order Quantity: 500 sq ft

Packaging Type16kg
ColorTranslucent & Dark Brown
Grade StandardTechnical Grade
Physical StateLiquid
ApplicationNo shrinkage in subsequent dry conditions
Brandsika
Shelf Life36 months
Storage Conditionstored in unopened, undamaged and original sealed packaging
Sika® Injection-202 IN is a very low viscous, elastic and solvent-free polyurethaneinjection resin. In contact with water, a uniform, closed and therefore watertight porestructure forms, which is elastic and flexible.

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES