Krishna Sales Co.

High build, single component, elastomeric polyurethane based waterproofing membrane.                                                                                                         WPM 158 is single component, high build, aliphatic polyurethane based elastomeric liquid applied waterproofing membrane which finds various usages in the construction industry. The cured membrane has a high flexibility, water resistance with excellent crack bridging properties. It is UV stable and can be left exposed without the need for any additional protective layers.                                  FEATURES

• Excellent compatibility with almost every construction material.
• Good resistance to wide range of chemicals and oils.
• Resistant to abrasion and blushing?? does not require protective screed.
• Elastomeric?? good crack bridging property.
• Single component?? no mixing and weighing at site.
• Weather and UV resistant.
• Excellent flexibility?? accommodates normal building movement.

COVERAGE

Approximately 1.5 to 1.8 kg/m2 in 2 coats for 1 mm thickness 

Self-smoothing epoxy floor topping (0.5 – 2.0mm).                        DESCRIPTION-

R 21 CE is a high gloss, self-smoothing, epoxy resin floor finish applied between 0.5 – 2.0 mm thickness. It combines outstanding wearing properties with chemical resistance and decorative finish. Ideally suited in situations where a seamless, joint free finish is required and maximum cleanliness is essential.                            

EATURES

• Seamless: easily cleanable to maintain high standards of hygiene
• Tough & Hard wearing: durable with low maintenance cost
• Resistant to a wide range of chemicals and liquids
• Self-smoothing: provides a flat high gloss finish
• Suitable for use as topping on existing epoxy screed
• Food grade: CFTRI approved; confirms to the specifications as per U.S FDA 175.300
• Supplied in pre-measured packs for 0.5 mm and 1 mm thickness requirements.

WPM 415 C is a specially developed chemical consisting of Portland cement, very fine treated silica sand and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and the by-products of cement hydration to cause a catalytic reaction, which generates a nonsoluble crystalline formation throughout the pores and capillary tracts of the concrete. The crystal formation follows the water back as far as it is present in the structure and permanently blocks the passage of water.  

Two component undertile waterproofing membrane...                    WPM 002 is a tough, fast drying two component waterproofing membrane specifically designed for use under tiles. WPM 002 is based on the most advanced acrylic polymer technology, and is totally resistant to re-emulsification. It is flexible, low in odour, and is fully compatible with polymer modified tile adhesives with fast drying properties to enable tiling in 16 - 24 hours. The product has been uniquely formulated with synthetic microfibers to increase its strength and eliminate the need for a separate reinforcement mat. WPM 002 meets the Green Building Council of Australia Green Star IEQ-13 requirements for Architectural Sealant when tested in accordance with SCAQMD Method 304-91 Determination of Volatile Organic Compounds (VOC) in Various Materials as referenced by South Coast Air Quality Management Division (SCAQMD) Rule 1168. WPM 002 is BRANZ appraised, BRANZ Appraisal No 701(2011) – ARDEX Under Tile External Waterproofing Membranes.

Polymer modified tile adhesive.                                                    DESCRIPTION:-                                                               Polymer modified grey cement-based adhesive, suitable for fixing ceramic tiles for floors & walls in interior situations. Suitable for fixing ceramic tiles upto 6 mm bed thickness (can be extended up to 12 mm thickness in area of limited extent). The set adhesive is water-resistant and is suitable for use in showers and bathrooms. Note: Not recommended for direct use onto gypsum plaster (wall finishes), paint or metal.                                                              FEATURES                                                                                1.Good bond strength.                                                      2.Water resistant.                                                                3.Easy mixing & application                                            4.Complies to the requirement of IS 15477: 2004 Type 1

White cement based, high polymer modified, tile/stone adhesive.    DESCRIPTION:-                                                                      High polymer modified, white cement-based tile adhesive suitable for fixing tiles with less than 3% porosity, like vitrified, semi-vitrified tiles and natural stones on walls and floor in interior and exterior situations. WHITE STAR is specially designed to fix marble tiles/stones to prevent discoloration/stains due to ironoxide. The set adhesive is water-resistant and is suitable for use in showers, wet areas and swimming pools. Also, ideal for renovation (tile-over-tile) for quick & easy installation works.                                FEATURES:-                                                                        1.High bond strength.                                                            2.Easy mixing, smooth application & better workability.          3.Suitable for most common substrates and tiles.                  4.Water resistant.                                                                      5.Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive).

High performance, polymer modified, non-slip adhesive.                DESCRIPTION:-                                                                   White cement based, high polymer modified, high strength adhesive for fixing light colored natural stones, glass mosaic on wall/floor in interior/exterior situations up to 6mm bed thickness (can be averaged up to 12mm in final bed thickness). DIAMOND STAR (White) is deformable and can accommodate shocks due to impact load and heavy traffic. The set adhesive is water resistant and non-slip.                                                                          FEATURES:-                                                                         1.Very high bond strength.                                                    2.Non-slip.                                                                        3.Deformable to accommodate minor shocks.                                 4.Water resistant.                                                                     5. Easy mixing, smooth application & better workability.                 6.Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive).

Premium quality, high polymer modified deformable adhesive.        DESCRIPTION:-                                                                  White cement based, water & frost resistant, high polymer modified, high strength adhesive for fixing tile and stone on wall/floor in interior/exterior situations upto 6mm bed thickness (can be extended up to 12 mm in area of limited extent). The set adhesive is water-resistant and suitable for use in swimming pools. PLATINUM STAR White is used for fixing ceramic, vitrified & fully vitrified tiles, glass mosaic, porcelain, terrazzo, metal or glass tiles, non staining natural stone and engineered stone.                        FEATURES:-                                                                              1.Very high performance and strength.                                  2.Flexible adhesive.                                                            3.Premium multi use adhesive.                                                  4.Excellent water and frost resistance.                                        5.Excellent tensile & shear adhesion.                                            6.Easy mixing, smooth application & better workability.  7.Complies with the requirement of IS 15477: 2004 Type 2.

Thin bed adhesive for AAC blocks.                                                DESCRIPTION:-                                                                           M 15 is a grey, polymer modified, water resistant adhesive suitable for AAC block work.                                                       FEATURES:-                                                                          1.Polymer modified adhesive.                                                  2.Good adhesion strength.                                                          3.Easy mixing & application.                                                      4.No curing required

High Performance Epoxy Tile Grout.                                              DESCRIPTION:-                                                                        EPOXY GROUT is hygienic, stain-resistant, 3 component epoxy resin-based grout with a high degree of resistance to chemical attack, abrasion and impact. The cured grout does not transfer taints to food products, prevents the entry of bacteria or dirt and is easily maintained in a sterile condition. EPOXY GROUT is designed for grouting glazed tiles, mosaic, vitrified and fully vitrified tiles, ceramic tiles, industrial tiles, granites, marbles & other natural stones, etc.                                                                                FEATURES:-                                                                                1.Hygienic and chemical resistant                                                2.Stain and bacterial resistant                                                    3.Can be cleaned off in 15 minutes and up to 60 minutes after application FEATURES Ÿ Provides high strength and durable joints

Commercial grade, self-levelling compound.                                                         DESCRIPTION:-

CL 11 has been especially designed to produce a smooth, flat surface when applied to hard, rigid sub-floors such as cement sand screeds, concrete, etc. CL 11 contains high quality special cements and selected fillers so that, when mixed with water, it produces a free flowing mortar with self-levelling properties. The mortar can be applied at a thickness from 3 – 5mm and suitable for internal areas only.                                                                                                                               

FEATURES:-

• Pumpable: highly fluid for fast installation
• Self-smoothing: produces flat and absorbent surface for subsequent finishes
• Walkable after 3 hours
• Ready to receive floor coverings within 48 hours

Epoxy based Car Park Protection system for Internal Decks.              DESCRIPTION:-                                                                        CPS 10 E is a tough, durable, epoxy based car pack protection system providing a seamless, wear resistant, profiled surface to intermediate decks of multi-story car parks. The high gloss helps to brighten the car park and provides aesthetical finish by demarcation of different areas.                                                         FEATURES:-                                                                                1.Seamless: easily cleanable to maintain high standards of hygiene 2.Tough & Hard wearing: durable with low maintenance cost          3. Resistant to a wide range of chemicals and liquids                      4. Provides a high gloss finish                                                     5. Anti skid                                                                               6. Supplied in pre-measured packs for ease of mixing and consistency at site.                                                                     7. Aesthetically attractive: Available in range of colour

Self-smoothing epoxy floor underlay.                                              Description:-                                                                                R 24 CE is an economical, self-smoothing, epoxy resin floor underlay applied between 1 - 4 mm thickness. It combines outstanding mechanical properties with chemical resistance to provide a flat, seamless surface to receive epoxy based coatings or toppings.                                                                                     

Polymer modified grout for wall and floor tile/stone joints.               DESCRIPTION:-                                                                           A high quality polymer-modified, water resistant, cement based grout designed for grouting glazed wall tiles, porcelain tiles, mosaic, vitrified & fully vitrified tiles, natural and engineered stones.                                                                                    FEATURES:-                                                                              1.Good bond strength                                                                2.Water resistant                                                                        3.For interior & exterior use                                                        4.Suitable for joint width of 1 - 6 mm Ÿ Conforms to overall Migration Test specifications as per USFDA - 175.300, certified by CFTRI for intended use for contact with portable water. 

Medium Duty Polyurethane Screed (2 – 5 mm).                                                      DESCRIPTION:-

R 70 CP is a polyurethane resin flooring system having outstanding wearing properties with high chemical resistance and pleasing decorative finish. Ideally suited in aggressive areas where a seamless, joint free finish is required and maximum cleanliness is essential. Suitable for use from 2mm up to 5mm thickness.                                                                                                                    

FEATURES:-

• Hard wearing: extremely durable and abrasion resistant with low maintenance cost
• Facilitates rapid application: can be applied on 7 days old concrete or 2 days old polymer screeds
• Resistant to a wide range of chemicals and liquids
• Seamless: easily cleanable to maintain high standards of hygiene
• High Impact resistance: Classified ‘High Impact Resistance’ under BS 8204: Part 1: 1999
• Supplied in pre-measured packs for ease of mixing and consistency at site
• Food grade: CFTRI approved; conforms to the specifications as per U.S FDA 175.300