Dr fixit
Our product range includes a wide range of dr. fixit roofseal flex, dr. fixit heat shield, dr fixit lw, dr. fixit bathseal, dr. fixit crack x shrinkfree and dr. fixit pidicrete urp (50kg).Dr. Fixit Roofseal Flex
Product Details:
| Minimum Order Quantity | 50 Pack |
| Crack bridging ability | upto 2 mm |
| Elongation at break | 100% minimum |
| Cure time after second coat | 7 days |
| Tensile strength | 0.4 Mpa minimum |
| Adhesion strength | 0.8 -1N/mm2 |
| pH | 7-11 |
| Mixed Density | 1.60 gm/cc |
Dr. Fixit Roofseal Flex is a two-component cementitious coating, composed of high-quality cement, properly selected & graded fillers, additives, and acrylic polymer. It is suitable for achieving waterproofing for roofs because it provides strong bonding, good waterproofing and excellent resistant to hydrostatic water pressure by forming a highly elastic seamless coating over the applied concrete surfaces.
Features:
- Water proofing: Tough film buildup provides excellent waterproofing.
- Elasticity: Highly elastic film formation which accommodates thermal movements.
- High film built-up: withstand 5 m hydrostatic pressure without any leakages.
- Bonding: Excellent adhesion to concrete and masonry substrates hence longer life.
- Seamless coating: Forms seamless coating without any joints, prevents water leakage.
- Non-toxic: LOW VOC.
- Ease of application: Easily applied by brush.
Limitations:
- Do not part mix. Mix the entire quantity of both the components at one go.
- Do not dilute.
- Always add powder to liquid to avoid lump formation.
- Do not cure by flooding with water.
- Cure the membrane with moist hessian cloths
- Do not conduct any ponding test before it is completely cured for 7 days
- Always protect the membrane with screed in areas exposed to foot and other traffic.
- Concrete surfaces must be cured for 28 days before application.
Callback
Dr. Fixit Heat Shield
Product Details:
| Accelerated weathering | Pass at 2000 Hours |
| Thermal conductivity | 0.029 w/mK |
| SRI Value | 83.8% |
| Total solar energy rejected | 94% |
| Wind driven rain resistance | No moisture penetration after 24 hours |
| Abrasion resistance | No wear after 450 litres of falling sand |
| Solid content | Less than 60% |
| Elongation | 200% |
| Relative heat gain | 30Btu/hr/sq.ft |
| Tensile strength | 0.276N/mm2 at 25 degree celsius |
| Form | liquid |
| Packaging Size | 20 litre |
| Color | White |
| Appearance | Free flowing, homogeneous & uniform paste. |
| Brand | Dr Fixit |
| Specific Gravity | 1.01 |
Dr. Fixit Heatshield is a heat reducing & 'Energy Saving' elastomeric coating composed of an acrylic emulsion
polymers, microspheres, properly selected & graded inert fillers, light fast & weather durable white pigments,
additives & water as a medium. It is used as a heat insulating coating on building rooftops & exterior walls because of it
helps in reducing power consumption substantially by reducing the load on air-conditioners & keeps the interiors
cool with the additional function of waterproofing.
Features
Heat Insulation-Reduces the conductivity of heat from exterior to interior, thus lowers the temperature.
Solar Reflectance-83.8% solar reflectance ( ASTM E-903 ), re-radiated heat back to atmosphere
UV and IR resistant-Resistance to UV & IR emission protects the coating from damage and reduces heat conductivity.
Microbial resistant-Resistance to algae and fungus growth results into lesser maintenance.
Non-Toxic water based system-Eco friendly
Energy Saving-Reduction in electrical consumption for air-conditioners saves energy cost.
Areas of Application
Terraces and rooftops of buildings - cementitious, asbestos & metal surface
Industrial & godown shades with GI or asbestos roof
Exterior walls of building
Cold storages, computer server rooms, electrical control panel rooms, etc
Metal & concrete storage tanks for water, chemicals, and fuel in petrochemical industry
Shelf Life & Storage
Shelf life is 24 months from the date of manufacturing. Store in a cool & dry place.
Keep away from direct sunlight.
Callback
Dr Fixit LW
Product Details:
| Water | 179 Kg/m3 |
| Cement | 380 Kg/m3 |
| Fine aggregate | 926 Kg/m3 |
| Application | Construction |
| Brand | Dr Fixit |
| Types | Waterproofing Coating |
Dr. Fixit LW is a unique cement additive for plaster/concrete for integral waterproofing.
Features:
- Waterproofs by filling pores and cutting capillaries
- Good workability
- Increases the cohesive strength of the mix
- Delays corrosion
- Prevents cracking in plaster
Callback
Dr. Fixit Bathseal
Product Details:
| Softening point | Greater than 60 degree celsius |
| Membrane thickness | 1.5 mm |
| Roll width | 100 mm |
| Appearance | Black colour Bitumen tape with Silicone release-paper on both side |
| Water permeability | Nil at 5 bar |
| Water absorption | Greater than 0.3 at 24 hours |
| Crack bridging ability | Greater than 1.5 mm |
| Cold temperature flexibility | Less than -6 degree celsius |
| Roll length | 10 m |
| Adhesion strength Primed surface Self | 1.0 N /mm |
Dr. Fixit Bathseal is a good penetrating, pore filling primer for plastered walls, asbestos, brick, false ceiling, concrete, etc.
Callback
Dr. Fixit Crack X Shrinkfree
Product Details:
| Drying time | 5- 6 hours at 30 degree Celsius |
| Base | Acrylic with specially added fillers |
| Specific gravity | 0.0.26 |
| Appearance | White paste |
| Full curing time | 7 days at 30 degree Celsius |
| Application | Construction |
| Brand | Dr Fixit |
| Types | Waterproofing Coating |
Dr. Fixit Crack X Shrinkfree is composed of quality polymers, select fillers & additives. It is fast drying and flexible, lightweight, the putty-like material used for filling cracks in plastered surfaces. It is 100% shrink-free, water-resistant after drying & bonds strongly to cementitious substrates.
Features:
- Shrinkage: non-shrink even after curing, prevents from cohesive & adhesive failure on exposure.
- Application: applied as one-time filling (does not require second time application, as required in another acrylic
- sealants).
- User friendly – One pack, very soft paste, easily applicable by fingers or putty knife.
- Sagging: non-sag nature helps in filling of vertical & overhead cracks.
- Sanding: no sanding is required.
- Staining: Does not migrate any liquid component into concrete surface thus prevents staining.
- Adhesion: excellent adhesion to cementitious surfaces prevents water leakages through the cracks.
- Durability: UV & weather resistance properties increases the life expectancy of the surface.
- Non-toxic: it is non-toxic hence user-friendly
- Paintability: easily paintable after 5-6 hours of application.
Limitation:
- Not for cracks in POP or painter’s putty.
- not recommended to use under the rain.
- Not meant for structural cracks in concrete, slab, construction joints.
- Jet or Power washing on walls not advisable prior to application.
- During application below 10°C, drying time will be delayed.
- Container to be tightly closed after application.
- If filler compound becomes too dry, add potable water in a ratio of 1 teaspoon in 250 ml of
- Dr. Fixit Crack-X Shrink-free.
Callback
Dr. Fixit Pidicrete URP (50KG)
Product Details:
| Minimum Order Quantity | 50 Pack |
| Features | CRACKING & HARDNESS |
| Usage/Application | CONCRETE REPAIR |
| Category | Waterproofing Coating |
| Specific Gravity | 27.50C |
| pH Value | 7.7 |
| Shelf Life | 1.5 YEARS |
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent inliquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofingof toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reducesshrinkage, prevents cracking, dust pick up & improves abrasion resistance
Callback
Dr.Fixit Fastflex
Product Details:
| Minimum Order Quantity | 100 Pack |
| Packaging Type | Packet |
| Coverage | 5-6 sq.ft in 2 coats at 1.5 mm DFT |
| Grade Standard | Analytical Grade |
| Brand | Dr Fixit |
| Category | Waterproofing Coating,Cementitious Waterproofing |
| Shelf Life | 12 MONTHS |
| Storage Condition | COOL DRY PLACE |
| Usage/Application | H i g h p e r f o r m a n c e P o l y m e r m o d i f i e d C e m e n t i t i o u s C o a t i n g |
Dr. Fixit Fastflex is a two component cementitious coating, composed of high quality cement, properlyselected & graded fillers, additives and liquid polymer.
Callback
DR FIXIT POWERCRETE
Product Details:
| Minimum Order Quantity | 50 Pack |
| Usage/Application | A p ow e r f u l COAT I N G syst e m for wat e r p roofing and r e pair s |
| Category | Waterproofing Coating |
| Shelf Life | 12 MONTH |
| Storage Condition | Store in cool place in unopened container |
| Coverage | 1.5 m2 - 1.6 m2 / kg |
| Brand | Dr Fixit |
| Grade Standard | Reagent Grade |
| Packaging Size | 20kg |
| Packaging Type | Bucket |
| Form of Chemical | Liquid |
An acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonrysurfaces.Areas of ApplicationConcrete structures like sunken portion, toilets, balcony, basement, chajjahs, terrace, concrete repairs and waterretaining structures.
Callback
DR FIXIT PIDIFIN 2K
Product Details:
| Minimum Order Quantity | 50 Pack |
| Usage/Application | Flexibility |
| Category | Cementitious Waterproofing |
| Specific Gravity | 1.65 - 1.75 |
| Shelf Life | 12 months |
| Storage Condition | temperature-controlled environment |
| Coverage | 1.5 -2 kg/}} m2 |
| Brand | Dr Fixit |
| Grade Standard | Reagent Grade |
| Packaging Type | Packet |
Dr. Fixit Pidifin 2K is a two component cementitious & acrylic flexible waterproofing & protective coating composed of best quality portaland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder.
Callback
DR FIXIT ROOFSEAL
Product Details:
| Minimum Order Quantity | 50 Pack |
| Shelf Life | 12 month |
| Storage Condition | Store in cool and dry place |
| Coverage | 0.75 ltrs/ m2 / coat |
| Brand | Dr Fixit |
| Packaging Size | 20kg |
| Packaging Type | Bucket |
| Form of Chemical | Liquid |
Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin emulsion. It is a tough yet extremely flexible coating that can be efficiently applied to any thickness by roller or squeegee creating a fully adhered monolithic waterproofing coating with no wastage.
Callback
DR.FIXIT PIDITOP 333
Product Details:
| Minimum Order Quantity | 100 Bag |
| Packaging Type | 25kg |
| Brand | dr fixit |
| Quantity Per Pack | 100 bag |
| Color | cement grey |
| Shelf Life | 12 months |
| Coverage | 2 kg/m2 |
| Usage/Application | Water absorption |
| Features | Abrasion & impact resistance |
Dr. Fixit Piditop 333 is composed of best quality ordinary portland cement, properly selected & graded washed& dried aggregates, polymer & additives. It is used as a concrete floor hardener for residential, commercial &industrial floors, because it forms a very high abrasion resistance to fresh concrete floor as a monolithic surface.It improves the strength & impact resistance of concrete floor to allow heavy duty.movements.
Callback
DR FIXIT MODERN TILE ADHESIVE
Product Details:
| Minimum Order Quantity | 50 Pack |
| Application | Tile Fixing |
| Form | Powder |
| Packaging Type | bag |
| Coverage Area | 50 - 55 sqft/20 Kg. Bag at 3 mm thickness |
| Brand | Dr. Fixit |
| Packaging Size | 20 & 30 kg |
| Types | Ceramic |
| Categories | Cementitious |
Dr. Fixit Modern Tile Adhesive is polymer modified cement base powder tile adhesive. It is grey coloured powder & as name suggest this product is most suitable for wall tiling on plastered wall & floor tiling on cementitious substrate by substituting conventional method of cement & sand.
Areas of Application
Fixing all types of tiles on internal/External floor & ceramic tiles on wall.
Features & Benefits
Crack free, breakage free & firm surface that preserves beauty of tiling for longer time.
Excellent waterproofing characteristics
Ready to use, needs no curing
Excellent adhesion, low shrinkage.
Sufficiently flexible to accommodate thermal & physical movements.
Quick tiling benefits contractors & consumers in terms of time saving.
Callback
Dr Fixit Micro Concrete
Product Details:
| Minimum Order Quantity | 50 Pack |
| Item Code | 208 |
| Packaging Size | 25KG |
| Packaging Type | BAG |
| Coverage | 1.3 m2 per 25 kg pack |
| Thickness | 10 mm thickness |
| Color | CEMENT GREY |
| Grade Standard | Technical Grade |
| Physical State | Powder |
| Usage | Industrial |
| Compressive Strength | 60 N/mm2 at 28 days |
| Application | Flowable |
| Brand | DR FIXIT |
| Shelf Life | SIX MONTH |
Dr. Fixit Micro Concrete is a ready to use dry powder which requires only addition of clean water at site toproduce a free flowing non shrink repair micro concrete. It is composed of good quality cement, properlyselected aggregates & additives.
Callback
Dr. Fixit Super Latex
Product Details:
| Packaging Size | 20 Kg |
| Brand | Dr Fixit |
| Packaging Type | Plastic Bucket |
Dr.Fixit Super Latex is based on modified styrene-butadiene latex used for high-performance applications in water-proofing and repairs. It is used for repairs of spalled concrete such as floors, columns, beams, chhajjas, slabs & water-proofing of toilets, bathrooms & terraces. It bonds strongly to old & new concrete or plaster.
Callback
PU INJECTION GROUT
Callback
DR FIXIT REPELLEN WR
Callback
Additional Information:
- Minimum Order Quantity: 50 Pack
DR FIXIT ROOF SEALFLEX
Callback
Additional Information:
- Minimum Order Quantity: 100 Pack
DR FIXIT PU FOAM INJECTION
Product Details:
| Property Type | Residential |
| Applicable Area | Ceiling |
| Coverage Area | depending on porosity of the substrate |
Dr. Fixit PU Foam Injection is based on MDI (Methylene Diphenyl iso cyanate) polyurethane pre- polymer& accelerator. The system only reacts when it comes in contact with water, producing a relatively stiff & inertpolyurathane foam.
Callback
DR FIXIT NEW COAT white
Product Details:
| Minimum Order Quantity | 50 Pack |
| Brand | Dr Fixit |
| Usage/Application | Applicable on asbestos sheets. |
| Packaging Size | 20kg |
| Category | Waterproofing Coating, Acrylic Based Polymer Coating |
| Type | acrylic elastomeric waterproofing coating |
| Features | flexibility |
| Specific Gravity | 1.29 |
Dr. Fixit Raincoat is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments,
properly selected & graded fine fillers, many additives & water as a medium.
It is used as a waterproofing & protective coating for exterior walls of the buildings because
it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging
ability, weathering durability and an excellent resistance to the growth of microorganisms.
Callback