Krishna Sales Co.

Additional Information:

• Production Capacity: avilable
• Delivery Time: immediate
• Packaging Details: 25kg bag

• Shrinkage: non-shrink even after curing, prevents from cohesive & adhesive failure on exposure.
• Application: applied as one-time filling (does not require second time application, as required in another acrylic
• sealants).
• User friendly – One pack, very soft paste, easily applicable by fingers or putty knife.
• Sagging: non-sag nature helps in filling of vertical & overhead cracks.
• Sanding: no sanding is required.
• Staining: Does not migrate any liquid component into concrete surface thus prevents staining.
• Adhesion: excellent adhesion to cementitious surfaces prevents water leakages through the cracks.
• Durability: UV & weather resistance properties increases the life expectancy of the surface.
• Non-toxic: it is non-toxic hence user-friendly
• Paintability: easily paintable after 5-6 hours of application.

Limitation:

• Not for cracks in POP or painter’s putty.
• not recommended to use under the rain.
• Not meant for structural cracks in concrete, slab, construction joints.
• Jet or Power washing on walls not advisable prior to application.
• During application below 10°C, drying time will be delayed.
• Container to be tightly closed after application.
• If filler compound becomes too dry, add potable water in a ratio of 1 teaspoon in 250 ml of
• Dr. Fixit Crack-X Shrink-free.

Dr. Fixit LW is a unique cement additive for plaster/concrete for integral waterproofing.

Features:

• Waterproofs by filling pores and cutting capillaries
• Good workability
• Increases the cohesive strength of the mix
• Delays corrosion
• Prevents cracking in plaster

Dr. Fixit LW is a unique cement additive for plaster/concrete for integral waterproofing.

Features:

• Waterproofs by filling pores and cutting capillaries
• Good workability
• Increases the cohesive strength of the mix
• Delays corrosion
• Prevents cracking in plaster

Dr.Fixit Super Latex is based on modified styrene-butadiene latex used for high-performance applications in water-proofing and repairs. It is used for repairs of spalled concrete such as floors, columns, beams, chhajjas, slabs & water-proofing of toilets, bathrooms & terraces. It bonds strongly to old & new concrete or plaster.

Dr. Fixit Torchshield P3160 Waterproofing Chemical range of polymer modified membranes are modified bitumen waterproofing membranes manufactured by saturating and coating a polyester carrier with a waterproofing compound made of a special grade of modified bitumen with APP polymers. Whereas the modifiers boost the thermal, mechanical and ageing chtaracteristics of the membrane compound, the non woven polyester carrier establishes the mechanical characteristics as it performs as the reinforcement element that provides the membrane with its significant Tensile Strength, Tear Strength, Puncture Resistance and Elongation properties. The upper and lower surfaces are laminated with polyethylene film. Dr. Fixit Torchshield AP membranes are ideal for use in a wide range of waterproofing applications such as foundations, basements, tunnels, roofs, car park decks and other civil works. The chemical resistance of Dr. Fixit Torchshield AP makes it particularly suitable for tanking applications in areas where aggressive ground water conditions prevail.

• Water proofing: Tough film buildup provides excellent waterproofing.
• Elasticity: Highly elastic film formation which accommodates thermal movements.
• High film built-up: withstand 5 m hydrostatic pressure without any leakages.
• Bonding: Excellent adhesion to concrete and masonry substrates hence longer life.
• Seamless coating: Forms seamless coating without any joints, prevents water leakage.
• Non-toxic: LOW VOC.
• Ease of application: Easily applied by brush.

Limitations:

• Do not part mix. Mix the entire quantity of both the components at one go.
• Do not dilute.
• Always add powder to liquid to avoid lump formation.
• Do not cure by flooding with water.
• Cure the membrane with moist hessian cloths
• Do not conduct any ponding test before it is completely cured for 7 days
• Always protect the membrane with screed in areas exposed to foot and other traffic.
• Concrete surfaces must be cured for 28 days before application.

Additional Information:

• Packaging Details: 280 ml & 240 ml plastic cartridge with separate nozzle

Dr. Fixit Krystalline is composed of high quality cement, properly selected & graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a chemically active waterproofing treatment for concrete.

Dr. Fixit Piditop 333 is composed of best quality ordinary portland cement, properly selected & graded washed& dried aggregates, polymer & additives. It is used as a concrete floor hardener for residential, commercial &industrial floors, because it forms a very high abrasion resistance to fresh concrete floor as a monolithic surface.It improves the strength & impact resistance of concrete floor to allow heavy duty.movements.

Dr. Fixit Modern Tile Adhesive is polymer modified cement base powder tile adhesive. It is grey coloured powder & as name suggest this product is most suitable for wall tiling on plastered wall & floor tiling on cementitious substrate by substituting conventional method of cement & sand.

Areas of Application

Fixing all types of tiles on internal/External floor & ceramic tiles on wall. 

Features & Benefits

Crack free, breakage free & firm surface that preserves beauty of tiling for longer time.

Excellent waterproofing characteristics 

Ready to use, needs no curing 

Excellent adhesion, low shrinkage. 

Sufficiently flexible to accommodate thermal & physical movements. 

Quick tiling benefits contractors & consumers in terms of time saving.